NHT Classic Four - 4-way floorstanding speaker (pair)

Creating a Large Listening Area
By using two low distortion drivers mounted close together on a single plate, NHT is able to produce a speaker with a large listening area, lower distortion, and higher power handling than typical two-way designs.

All of the woofers in the Classic line feature frames made from BMC (Bulk Molding Compound). Usually a designer has to choose between inexpensive, mechanically sound materials such as ABS plastic and stamped steel, or expensive materials such as cast aluminum or magnesium that are ideal acoustically and mechanically. BMC delivers the best of both worlds. It is a cost effective material that is immensely stiff and easily shaped into acoustically ideal shapes.

Beautiful Environmentally Friendly Cabinet
The cabinet is made with MDF, a board manufactured primarily of wood residues from the production of lumber and plywood with a low percentage of virgin tree wood. NHT finishes them with seven coats of hand-finished polyurethane applied in a "solid particle" method that's safe for the environment. This finish is then sealed with two coats of automotive grade clear-coat to protect the finish. By avoiding exotic wood veneers, and using materials such as MDF, NHT doesn't sacrifice scarce natural resources to make acoustically sound furniture grade cabinets.