AudioQuest

AudioQuest NRG Hurricane Source - Storm Series AC Power Cable IEC 20 Amp 3.0m

$2,450.00
  • AudioQuest NRG Hurricane Source - Storm Series AC Power Cable IEC 20 Amp 3.0m
  • AudioQuest NRG Hurricane Source - Storm Series AC Power Cable IEC 20 Amp 3.0m
  • AudioQuest NRG Hurricane Source - Storm Series AC Power Cable IEC 20 Amp 3.0m
  • AudioQuest NRG Hurricane Source - Storm Series AC Power Cable IEC 20 Amp 3.0m
HIGH PURITY CONDUCTORS - SOLID PERFECT-SURFACE COPPER+ (PSC+)

Solid Perfect-Surface Copper+ (PSC+) conductors prevent strand interaction, a major source of ear fatiguing transient intermodulation distortion. The astonishingly smooth and pure Perfect-Surface Copper+ eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other premium coppers. The superior purity of PSC+ further minimizes distortion caused by grain boundaries, which exist within any metal conductor. The astonishingly smooth and pure Perfect-Surface Copper further eliminates harshness and greatly increases clarity compared to OFHC, OCC, 8N and other premium coppers.

RF/ND-TECH (PATENTED RADIO-FREQUENCY GROUND-NOISE DISSIPATION) MINIMIZES CIRCUIT MISBEHAVIOR BY CANCELLING INDUCED RF NOISE

AC Ground wires may provide protection from an electrical short circuit, but they also act as an antenna. Thus, they are subject to induced radio-frequency (RF) noise. This RF noise bypasses component power supplies and is typically coupled directly into a system’s most sensitive audio/video circuits. AudioQuest’s RF/ND-Tech greatly reduces this distortion, yielding unprecedented levels of noise dissipation across the widest bandwidth (range) of radio frequencies possible. Our unique circuit topology uses a common-mode phase-cancelling array, in concert with proprietary dielectric materials which provide additional differential linear filtering. US Patent # 8,988,168.

72v Dielectric-Bias System (DBS)

Insulation is also a dielectric that can act like a shunt-filter. Biasing minimizes dielectric-noise and linearizes the filter, significantly improving wide-bandwidth dissipation of induced RF noise.

DIRECTIONALITY

All drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion. The correct direction is determined by listening to every batch of metal conductors used in every AudioQuest audio cable. When applicable, arrows are clearly marked on the connectors to ensure superior sound quality. For most models of AQ cable, the arrows not only indicate the direction that optimizes metal-directionality as part of Noise-Dissipation, but also indicates non-symmetrical attachment of shield and GND in order to optimize full-system performance.

AudioQuest

AudioQuest NRG Hurricane Source - Storm Series AC Power Cable IEC 20 Amp 3.0m

$2,450.00
OVERVIEW
Alternating Current (AC), is a far-from-perfect power source. AC power technology is well over a century old and was never designed to meet the exacting standards of today's high resolution audio-video components. AC noise is present at the utility source, and is then exacerbated by radio frequency noise that is induced (picked up by the AC power cord) and coupled to the component power supplies and to circuit ground. This creates distortion and low-level signal losses via the "masking effect." Most AC power cords and power conditioner-regenerators, though helpful to a point, are simply not up to the task.
Note: AudioQuest Hurricane/Source AC power cable is not appropriate for use with AC power conditioners, power regenerators, AC isolation transformers, AC battery back-up devices, as well as any power amplifier, powered sub-woofer, powered loudspeaker, powered receiver, or integrated amplifier (whether tube, solid state or digital
SPECIFICATIONS

Low-Z / Noise-Dissipation 3-Pole AC Power Cable


  • Solid Perfect-Surface Copper+ (PSC+) Conductors
  • Optimized For Source Components
  • RF/ND-Tech (US Patent # 8,988,168)
  • ZERO (No) Characteristic Impedance (50Hz – 1MHz)
  • 72v Dielectric-Bias System with Radio-Frequency Noise Trap
  • Directionally Controlled Conductors