Clearaudio

Clearaudio Nano V2 Phono Moving Coil/Moving Magnet Stage Pre-Amplifier (Silver)

$450.00
  • Clearaudio Nano V2 Phono Moving Coil/Moving Magnet Stage Pre-Amplifier (Silver)
  • Clearaudio Nano V2 Phono Moving Coil/Moving Magnet Stage Pre-Amplifier (Silver)
  • Clearaudio Nano V2 Phono Moving Coil/Moving Magnet Stage Pre-Amplifier (Silver)
  • Clearaudio Nano V2 Phono Moving Coil/Moving Magnet Stage Pre-Amplifier (Silver)

The Nano Phonophonostage isn't ruffled by anything. External interferences are no longer an issue with this fine piece of engineering.

Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges.

The nano phono headphone V2 additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.

Clearaudio

Clearaudio Nano V2 Phono Moving Coil/Moving Magnet Stage Pre-Amplifier (Silver)

$450.00

Clearaudio Nano V2 Phono Moving Coil/Moving Magnet Stage Pre-Amplifier (Silver)

SPECIFICATIONS

AMPLIFICATION: 34 dB (MM mode) 65 dB (MC mode)
INPUT LOAD: 47 kOhm / 220 pF / MM mode User MC mode
MM / MC INPUT: switchable (at bottom)
SUBSONIC FILTER: switchable (at bottom)
RIAA Nach RIAA: (Zeitkonst.: 75 μs / 318 μs / 3180 μs)
RIAA ACCURACY: ± 0.4dB @ 20Hz-50kHz
THD: < 0,04%
HEADROOM: 18 dB / MC
SIGNAL TO NOISE RATIO: 81 dB (A) (MM – Mode) 70 dB (A) (MC – Mode)
CHANNEL SEPARATION: > 80dB @ 1kHz
MAX. OUTPUT VOLTAGE: 10V eff. (1kHz)
Max. power consumption: 2.3 Watt
POWER SUPPLY: ±18V DC / 300mA (external power supply)
OUTPUTS: unbalanced (RCA)
WEIGHT: Approx. 1.1 lbs (preamp and power supply)
DIMENSIONS: (W/D/H in inches) 3.35 x 4.17 x 0.98