The slim DALI PHANTOM S-180 in-wall loudspeaker offers a full frequency response similar to that of a floorstanding loudspeaker, but without sacrificing valuable living room space. It delivers a no compromise in-wall audio performance with the use of proven speaker technologies. This includes our characteristic wood fibre cones, low-loss rubber surround, solid MDF front baffle, our signature hybrid tweeter module and our superior innovative magnet design including a SMC pole piece.
All models are built around a rotatable hybrid tweeter module making them easy to install for any audio use – be it stereo, centre channel or in a home cinema surround setup.
We have optimised the primary 8” wood fibre woofer for both bass and mid-range performance. To further enhance the bass performance, we have paired the primary woofer with a 10” passive carbon fibre radiator. This ensures that the PHANTOM S-180 really stands out from the crowd.
The ultra slim 103 mm cabinet design fits into almost any standard wall.
See the PHANTOM S whitepaper (below) for further technical information.
All speakers by DALI are designed around the principle of wide dispersion. This entails an off-axis optimisation of the audio reproduction. The technology is perfect for use in install speakers, since they are always mounted flush against either a wall or ceiling.
One of our goals for the PHANTOM S and M models was to create high-end in-wall speakers with a slim profile that allowed for maximum flexibility when installed. We achieved this by keeping the cabinet depths at only 100-103 mm, which fits into almost any standard wall.
Advanced Soft Magnetic Compound (SMC), which eliminates variation of flux strength in the magnet gap. It reduces distortion to a minimum compared to conventional drivers.
10" PASSIVE RADIATOR
Featuring a 10" passive bass reflex woofer made of very well behaving carbon fibre - taken from our highend subwoofer 'DALI SUB P-10 DSS'.
The PHANTOM S-180 is a full-size in-wall loudspeaker, which combines a 8" wood fibre driver with a 10" passive carbon fibre radiator and a rotatable hybrid tweeter module to deliver coherent, clean and detailed room filling sound. All this squeezed into a slim cabinet that fits into almost any standard wall.
|Frequency Range (+/-3 dB) [Hz]||49 - 25,000|
|Sensitivity (2,83 V/1 m) [dB]||89.0|
|Nominal Impedance [ohms]||6|
|Maximum SPL [dB]||109|
|Recommended Amplifier Power [W]||40 - 200|
|Crossover Frequency [Hz]||2,800 / 15,000|
|Hybrid tweeter module, Super high freq. driver, Diaphragm type|
|Hybrid tweeter module, High frequency driver, Quantity||1 x 17 x 45 mm|
|Hybrid tweeter module, High frequency driver Diaphragm type||Ribbon|
|High frequency driver, Quantity||1 x 28 mm|
|High frequency driver, Diaphragm type||Soft Textile Dome|
|Low frequency driver, Quantity||1 x 8"|
|Low frequency driver, Diaphragm type||Wood Fibre Cone|
|Low frequency passive driver, Quantity||1 x 10"|
|Low frequency passive driver, Diaphragm type||Carbon fibre cone|
|Enclosure type||Closed Box With A Passive Radiator|
|Connection Input||Single Wire|
Centre / Soundbar
|Dimensions (HxWxD) [mm]||898 x 453 x 110|
|Cut-Out Dimensions (HxWxD) [mm]||865 x 420 x 103|