The elegant RUBICON C is our way of creating beautiful harmony in the transition to the digital world while keeping the high-quality character. RUBICON 6 C is part of a wireless speaker system that empowers the costumer to easily access all their music in the best possible quality, and play it back without the need for complicated electronics.
The RUBICON 6 C is able to deliver enough physical bass to fill a larger room, especially thanks to the woofers.
The RUBICON C audio system delivers modern Hi-Fi on the same high quality level - or better - than the original RUBICON series. This due to the combination of the drivers and cabinet construction from the original passive series, the amplifier technology from CALLISTO range, and the wireless audio transmission from the DALI Sound HUB. Together they shape the RUBICON C series.
Available in three finishes – High-Gloss White, High-Gloss Black and Walnut – the RUBICON 6 C comes complete with rubber feet to hold it firmly in position and to help keep it at its aesthetic as well as acoustic best.
With a focus on zero loss, no latency and easy setup, the wireless connection only requires power to be fully working, which means easy change of setup and no installation of audio cords. The wireless connection between RUBICON C and the HUB will even work without any Wi-Fi signal active, due to the direct connection between the units.
SMC MAGNET SYSTEM
With a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.
SOFT DOME TWEETER
With a clear heritage from our high-end series, the lightweight dome tweeter offers best in class resolution.
WOOD FIBRE CONES
Using a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.
The RUBICON 6 C is part of a 'best in class' active speakers system with a powerful driver construction that teams up to move a lot more air and reach even lower into the deep bass region. The floorstanding speaker has an extremely stable wireless connection using its own proprietary network. Featuring two 250 watts musical Class D amplifiers in each speaker, there is plenty of power to ensure more than enough sound pressure even in complex musical passages or massive explosions in movies.
|Frequency Range (+/-3 dB) [Hz]||37 - 30.000|
|Maximum SPL [dB]||110|
|Crossover Frequency [Hz]||800 - 2,600 - 14,000|
|Crossover Principle||Hybrid Full Active 24 bit DSP and Passive all analogue|
|Hybrid tweeter module, Super high freq. driver, Quantity||1 x 17 x 45 mm|
|Hybrid tweeter module, Super high freq. driver, Diaphragm type||Ribbon|
|Hybrid tweeter module, High frequency driver, Quantity||1 x 29 mm|
|Hybrid tweeter module, High frequency driver Diaphragm type||Soft Textile Dome|
|Low frequency driver, Quantity||2 x 6½"|
|Low frequency driver, Diaphragm type||Wood Fibre Cone|
|Enclosure type||Bass Reflex|
|Bass Reflex Tuning Frequency [Hz]||36.5|
|Max. Amplifier Power Output [RMS watt]||250|
|Amplifier Type||Discrete Class D (Closed Loop, Self Oscillating)|
|Onboard DAC||Burr Brown PCM1796 (Balanced output)|
|Connection Input||ADC-in (RCA)|
|Wireless Input(s)||Full 24 Bit / 96 kHz (No bit-loss attenuated)|
|Wireless Audio RF Band [MHz]||5725-5875 MHz|
|Max. Digital Resolution [bits/KHz]||24 / 96|
|Recommended Distance From Wall [cm]||20 - 180|
|Max. Power Consumption [W]||325|
|Standby Power Consumption [W]||1.2|
|Dimensions With Base (HxWxD) [mm]||990 x 200 x 380|
Micro Fibre Cloth
|Input Sensitivity [mV]||1,250|
|Input Impedance RCA [Ω]||5k|
|Input Mains Voltage [Volts]||Universal mains 100 - 240V|