Lyra

LYRA - Kleos Turntable Cartridge

$3,695.00
  • LYRA - Kleos Turntable Cartridge

Lyra

LYRA - Kleos Turntable Cartridge

$3,695.00
The Kleos is the lowest cost Lyra cartridge to feature the full fledged Ogura manufactured boron cantilever and coil system with Lyra original line-contact (3 x 70μm) stylus. This is similar to what is employed on even the most expensive Lyra models. Nevertheless, the most important element of the new Kleos is it’s sound. We firmly believe that the Kleos is capable of extracting more information from the vinyl grooves than it’s predecessors, and that the reproduction of music is both more dynamic, more detailed, and more natural than the models preceding it. We also are of the opinion that the Kleos will set a new standard for sonic performance at it’s price point. Specifications for Lyra Kleos Designer: Jonathan Carr Builder: Yoshinori Mishima (final build, testing), Akiko Ishiyama (preliminary build) Type: Medium weight, medium compliance, low-impedance moving coil cartridge Stylus: Lyra-designed long-footprint variable-radius line-contact nude diamond (3um x 70um), slot-mounted Cantilever system: Solid boron rod with short one-point wire suspension, directly mounted into cartridge body Coils: 2-layer deep, 6N high-purity copper, square-shaped chemically-purified high-purity iron former, 5.4ohm self-impedance, 9.0uH inductance Output voltage: 0.5mV@5cm/sec., zero to peak, 45 degrees (CBS test record, other test records may alter results) Frequency range: 10Hz ~ 50kHz Channel separation: 35dB or better at 1kHz Compliance: Approx. 12×10-6cm/dyne at 100Hz Vertical tracking angle: 20 degrees Cartridge body: One-piece machining from solid 7075 alloy billet, with reduced-surface higher-pressure headshell contact area, partially non-parallel shaping, phase-interference resonance-controlling mechanism, and body threaded directly for mounting screws Cartridge mounting screws: 2.6mm 0.45 pitch JIS standard Distance from mounting holes to stylus tip: 9.5mm Cartridge weight (without stylus cover): 8.8g Recommended tracking force: 1.65 ~ 1.75g (1.72g recommended) Recommended load directly into MC phono input: 95.3ohm ~ 816ohm (determine by listening, or follow detailed guidelines in user manual) Recommended load via step-up transformer: 5 ~ 15ohm (step-up transformer’s output must be connected to 10kohm ~ 47kohm MM-level RIAA input, preferably via short, low-capacitance cable) Recommended tonearms: High-quality pivoted or linear tangential) tonearms with rigid bearing(s), adjustable anti-skating force, preferably VTA