Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges.
The nano phono headphone V2 additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.
|WEIGHT||Approx. 500 g (preamp and power supply)|
|DIMENSIONS (W/D/H in inches)||3.35 x 4.17 x 0.98|
|DIMENSIONS (W/D/H in mm)||85 x 106 x 25|
The nano phono V2 phonostage isn't ruffled by anything. External interferences are no longer an issue with this fine piece of engineering.
|AMPLIFICATION||34 dB (MM mode) 65 dB (MC mode)|
|INPUT LOAD||47 kOhm / 220 pF / MM mode User MC mode|
|MM / MC INPUT||switchable (at bottom)|
|SUBSONIC FILTER||switchable (at bottom)|
|RIAA||Nach RIAA (Zeitkonst.: 75 μs / 318 μs / 3180 μs)|
|RIAA ACCURACY||± 0.4dB @ 20Hz-50kHz|
|HEADROOM||18 dB / MC|
|SIGNAL TO NOISE RATIO||81 dB (A) (MM – Mode) 70 dB (A) (MC – Mode)|
|CHANNEL SEPARATION||> 80dB @ 1kHz|
|MAX. OUTPUT VOLTAGE||10V eff. (1kHz)|
|POWER CONSUMPTION||Max. consumption: 2.3 Watt in operation: 2.3 Watt Standby mode: < 0.3 Watt Off mode: 0.0 Watt|
|POWER SUPPLY||±18V DC / 300mA (external power supply)|